Как реалистично покрасить персонажа из игры Dark Souls // Обзор 3д принтера Anet N4
Articles
14


Hi I decided to decorate my desktop a little and for this purpose I chose a character from the Dark Souls game. Of course, you can buy a similar one on Amazon, but it’s much nicer to do it yourself. This story is about realistic painting of a miniature, as well as an imitation of torn fabric and a realistic tail on a helmet. I also really wanted to try out a new printer with liquid photopolymer. People often ask where do I get 3D models. There are tons of options, depending on the goal. Sometimes modelers themselves send me, more often I model objects myself or search on the Internet for paid or free. As a rule, you have to tinker a lot with free ones. If you spend 10-15 minutes searching for what you need, you will most likely be able to find something suitable for yourself. And it’s better to swing the skill of 3D modeling and do anything without depending on others. 3D printers confidently enter our lives, as once personal computers. So, the Anet N4 photopolymer printer came to me from China. On the day of publication, its price was $280 The average price on Aliexpress is $ 400-500. N4 is the younger brother of the N7 printer, which in turn costs $ 1,500 already. The lid is completely removable, which seems convenient enough, but not necessary at all. The package is very rich, there is a flash drive, a polymer drain filter, gloves, 2 scrapers. One way steel, it’s straight cool. Unlike Photon, Anet has no fans, and this makes it much quieter. The printer has only one guide along which the printing table runs, just like the first model of the photon. Print Height 138 mm The polymer bath is designed for the print area 120 by 65 mm. Nothing special, differs from the photon only in shape. Before you start printing, you must first calibrate. I put a printing table, fix it with a screw on the axis. I check the display, for this there is a special function in the printer menu. The display is ok. Loosen the screw that holds the table from rotation. So that it rotates freely. I put a sheet on the display and lower the table. It is necessary to ensure that the sheet under the table moves with effort. In the printer menu, I fix the zero point along the Z axis. I put the bath and fix it with screws on the sides. You can print with any polymer, for this printer I ordered a gray NovaStan polymer, be sure to shake well before use. I fill the polymer in the bath, insert the USB flash drive with the prepared 3D model in the slicer and find it in the printer menu. That’s all, start printing. I was very worried about the result due to the build quality of the printer. There are backlashes, but this, oddly enough, does not affect work. Anet is a great home printer. Printing has finished and I already see that the quality and detail are excellent. The model was printed the for first time, which for me is not usually on gray tar. With it, difficulties often arise. I take off the lid and understand that the printing table on top is absolutely horizontal and that the excess polymer did not drain anyone. It is better if the shape of the printing table is trapezoidal on top, then the polymer itself flows into the tray. I wash the model with alcohol in an ultrasonic bath. The alcohol in the bath is a little green because before that I was already washing models of transparent green polymer there. This will not affect the cleaning of the new model. Just a couple of minutes and the model is cleared. I remove the bulk of the supports with my hands, they easily move away and send the part to the ultraviolet chamber for complete curing. All printed parts are painted with black primer. I paint the armor with steel acrylic paint. Using an aluminum paint with a dry brush, I additionally go through the elements of the armor. This helps to highlight the edges and the armor becomes brighter and shines in the light. I give the chain mail a copper tint with the same dry brush. I paint the belt, and then the most delicious. Imitation of flaw. I use ordinary napkins without texture. I tear it into small pieces, coat them with Mod Podge glue and stick them on my cloak. Additionally, I moderate the edges. Once the glue has dried, I sanded the surface of the paper so that it becomes one with the plastic cloak. In painting thumbnails, it is important to follow one rule. Primary color, shadow color and light color. Then, even for a beginner, painting will look solidly. For the main color of the cloak, I chose blue, with a lighter shade with a dry brush I will paint all the folds on top, add a little dark in all the recesses. Dunno where I have seen these colors. I try to draw it. The pattern seems to be fresh, and the cloak looks like old one. It is necessary to balance, i.e. age drawing. I do this with a piece of sponge painted in the color of a cloak. Black metallic add chips and scuffs on the armor. I glue all the parts into a single design. I make a tail on a helmet from felting fiber. First, I create the necessary shape from the wire, and then I attach the fiber to the super torque. I give it the final form. While the tail on the helmet is dry, I paint the stand. The figure is ready and will now stand next to the working computer. In the next video will detail the process of creating a sea of epoxy… Thanks for watching. Cya

3д принтер Anet N4: https://shop.anet3d.com/products/n4-lcd-resin-3d-printer
Aliexpress: https://ru.aliexpress.com/item/4000093029536.html
—————————————————————————————-
0:45 Распаковка принтера Anet N4
1:46 Калибровка принтера
3:32 Промывка модели в спирте
3:52 Покраска
5:31 Создание рванины
8:39 Создание реалистичного хвоста
9:26 Покраска подставки

Попробуй использовать кору деревьев. В тертом виде очень походит на землю или грязь

Конечно, можно купить это все на Амазоне, но сделать самому будет приятней
Но можно купить 3д принтер за 30х баксов))
Оч прикольно

Конечно, можно купить это все на Амазоне, но сделать самому будет приятней
Но можно купить 3д принтер за 30х баксов))
Оч прикольно

это больше назгул чем арториас Башка хуево смотрится

Классно! Можешь сделать видео токого же формата, только с фигуркой из Звездных Воин?

14 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Marvel Cinematic Universe: Prelude to Infinity War
Articles
100
Marvel Cinematic Universe: Prelude to Infinity War

Before creation itself, there existed six singularities of immense power. When the universe exploded into being, their remnants were forged into concentrated ingots possibly by the Cosmic Entities Infinity, Entropy, Eternity and Death. Over time, the infinity stones representing Space, Mind, Reality, Power, Soul and Time became scattered across the …

God’s Word to the World – Series 7 – Part 6
Articles
4
God’s Word to the World – Series 7 – Part 6

>>ANNOUNCER: TODAY ON THE JOHN ANKERBERG SHOW AS WE APPROACH THE NEW YEAR’S CELEBRATION, MANY IN OUR WORLD WILL NOT BE CELEBRATING. THE UNITED NATIONS SAYS THAT THERE ARE NOW OVER 70 MILLION PEOPLE THAT HAVE FLED FROM THEIR COUNTRIES AND ARE LIVING IN REFUGEE CAMPS. AND TODAY WE ARE …